Fix the problem No Network Access in Windows 7/8/10

Fix the problem No Network Access in

 Windows 7/8/10

Connect to his home wireless network one day even though it had been working NOT fine for a few months. When he went to the Network and Sharing Center,  Please follow the below step.

👇👇👇Watch The Full Video👇👇👇

Unidentified Network

this is our Local network connection,  Unidentified Network, and No Internet Access and sure enough, he could not connect to the network, The same thing showed up in the taskbar icon for network connections yellow line:-

No Network Access

this problem on a couple of Laptop & Desktop machines and depending on your system, the multiple possible solutions. Try each one listed below and check to see if it fixes your problem before following on Trick.

Trick 1 – On/off Your Router, Access point, and Modem

first, of trick, make sure you restart your wireless router, Access point, and your modem no reason if it’s a problem with the router.

Trick 2 – Disable antivirus firewall  Network Agent

Disable services

It also might be a good idea to disable any third-party firewall like McAfee firewall or Norton firewall, etc.

Trick 3- Update Your Network Card Driver

You can update your driver in one of two ways: either via Windows or by downloading the driver yourself manually from the manufacturer's website. Click on Start, type in devmgmt.MSC, press Enter and then expand Network Controllers and right-click on the problem network card.

network card

Now click on the Driver tab and choose Update Driver.

update driver

If that doesn’t work, you can also uninstall the network driver and then reinstall it after a restart. This has also been known to fix the problem with some people. Note that Windows will automatically reinstall the driver for you. In case it does not, you can always download the latest driver and then install it.

                                    

Trick 4 – Changing the IP Address

Try to Changing the IP Address settings and fix any problems with the TCP/IP stack by running the Microsoft Fixit solution here:

https://support.microsoft.com/en-us/help/299357/how-to-reset-tcp-ip-by-using-the-netshell-utility

This solution is a little tricky because it can be something random, but you need to go to Network and Sharing Center, click on Change Adapter Settings, then right-click on Local Area Connection or Wireless Network Connection and choose Properties.

Click on Internet Protocol Version 4 (TCP/IPv4) and check to make sure that you are obtaining an IP address automatically from DHCP. If you are using static IP addresses, make sure it’s the correct IP address and subnet mask.

Trick 5– Run a Network Troubleshooting

Click on Start and type in troubleshoot. Click on the first choice at the top. This should open the troubleshooting dialog.

इंटरनेट कनेक्शन समस्या निवारण पर क्लिक करें। यह आपके नेटवर्क एडेप्टर की जांच करना चाहिए और यह सुनिश्चित करना चाहिए कि यह सक्षम है, यह ठीक से काम कर रहा है, इसे सही नेटवर्क जानकारी मिली है, आदि।

इस समस्या को ठीक करने के लिए मुझे जो भी समाधान मिल सकता है, वह है। यदि आपके पास अभी भी बिना इंटरनेट के उपयोग के साथ अज्ञात नेटवर्क है, तो यहां अपने चश्मे पोस्ट करें और हम मदद करने की कोशिश करेंगे! का आनंद लें!